Видео

@anthonymadmanstricklandspo7818, I am not sure if what you are telling me is the clutch spins when you have it engage & it pulls the wires out. If that is the problem look for a bolt or some type of "retainer, for lack of a better word". The clutch should have a hole or a notch that a "retainer" would go into to keep it from spinning. Let me know if this was of help. Joe Z

@@JOEZEP54 yes the clutch stopper bracket was broke but now we are trying to figure out how to get the pto which is a new switch to activate the blades, when we touch clutch with the hot wire it activates but not from the switch. Hopefully I am explaining this right thank again

@@anthonymadmanstricklandspo7818 Check the wire coming from the switch to see if you are getting 12 volts. If not check the fuse.

@@JOEZEP54 ok we did that my father in his way back over in a few so we can take another go at it, I’ll let you know how it’s going thanks

Thank you for watching and taking the time for this comment. @nitanice I started this channel for family & friends. As such I keep it family friendly. Comments that criticize are allowed as long as they respect this. Any comments using foul language will be warned & hidden. If they post another comment using foul language they will be blocked. @nitaniceI have other videos on my channel that cover different subjects and new videos that may also be of help or interest. Your support is not required but always appreciated. If you are inclined to do so your Subscription, Likes, Comments and sharing this content would help me to reach other viewers that may also find this channel useful or entertaining. Stay safe, Joe Z

Thank you for watching and taking the time to add this information, which if it was done would have saved me a lot of time. @flickaclit6997 I have other videos on my channel that cover different subjects that you are welcomed to comment on. Your support is not required but always appreciated. If you are inclined to do so your Subscription, Likes, Comments and sharing this content would help me to reach other viewers that may also find this channel useful or entertaining. Stay safe, Joe Z

Thank you for watching and your question. I explained what I thought was causing this problem. In the end I am not sure if the valve adjustment or cleaning the carburetor out once again remedied the issue. It may have been a combination of all the above. It did surge when I first started it at the end of the video but smoothed out after cutting the lawn. This leads me to believe it was a carburetor issue. Maybe the smallest partial causing a blockage. Could not say 100%. Hope the issues I mentioned along the way was of some help. Stay safe, Joe Z

Thank you for watching and taking the time to comment. @vernroach3413 I have other videos on my channel that cover different subjects and new videos added weekly that may also be of help or interest. Your support is not required but always appreciated. If you are inclined to do so your Subscription, Likes, Comments and sharing this content would help me to reach other viewers that may also find this channel useful or entertaining. Stay safe, Joe Z

You're welcome, I am glad this was of help. Do not forget to push that lever back. Otherwise next week when you try to dive it you will be wondering why it won''t move 🤔 And thank you for watching and taking the time to comment. @diarrhea_splatter I have other videos on my channel that cover different subjects and new videos added weekly that may also be of help or interest. Your support is not required but always appreciated. If you are inclined to do so your Subscription, Likes, Comments and sharing this content would help me to reach other viewers that may also find this channel useful or entertaining. Stay safe, Joe Z

You're welcome, I am glad this was of help. It's comments like yours that makes producing these videos satisfying. @addies_daddy2913 I have other videos on my channel that cover different subjects and new videos added weekly that may also be of help or interest. Your support is not required but always appreciated. If you are inclined to do so your Subscription, Likes, Comments and sharing this content would help me to reach other viewers that may also find this channel useful or entertaining. Stay safe, Joe Z

@MrKenstar2 This could take anywhere from 5 to 20 minutes to do depending what you find. I am sure you can find a one minute Short to show how to do it. In this video I showed what I did that worked & what did not work. For someone that is trying this for the first time it may be of help to decide what may work for them. Stay safe, Joe Z

You're welcome, I am glad this saved you an extra trip. And thank you for watching and taking the time to comment. @garyday668 The videos I have on this tire changer are when I first used it. They have some tips & you can learn from my errors LOL I have other videos on my channel that cover different subjects and new videos added weekly that may also be of help or interest. Your support is not required but always appreciated. If you are inclined to do so your Subscription, Likes, Comments and sharing this content would help me to reach other viewers that may also find this channel useful or entertaining. Stay safe, Joe Z

LOL, A little further south. Grew up in the Bronx. Thank you for watching and taking the time to comment. Hope this video was of some help. @jheurtin1120 I have other videos on my channel that cover different subjects that may also be of help or interest. Your support is not required but if you would like to help support a BB ( Bronx Boy) your Subscription, Likes, Comments and sharing this content would help me to reach other viewers that may also find this channel useful or entertaining. Stay well, Joe Z

You're welcome, I am glad this was of help. And thank you for watching and taking the time to comment. @nicbeesley893 I have other videos on my channel that cover different subjects and new videos that may also be of help or interest. Your support is not required but always appreciated. If you are inclined to do so your Subscription, Likes, Comments and sharing this content would help me to reach other viewers that may also find this channel useful or entertaining. Stay safe, Joe Z

You're welcome, I am glad this was of help. And thank you for watching and taking the time to comment. I know what you mean. But after you work on it a couple of times & get familiar with how it all works it does get easier. @jamesfplatt I have other videos on my channel that cover different subjects and new videos added weekly that may also be of help or interest. Your support is not required but always appreciated. If you are inclined to do so your Subscription, Likes, Comments and sharing this content would help me to reach other viewers that may also find this channel useful or entertaining. Stay safe, Joe Z

It should ..🤔 maybe with a few more "touch ups" LOL Stay well, Joe Z

Not sure of your question. Drum spins then shut off?

@JOEZEP54 same problem you show in the video, but the drum spins when you test it with the door open

@@Wgt40 Does it stop running after a couple of minutes?

@@JOEZEP54 as soon as I let the knob go like in the video

@@Wgt40 Good morning, just got up. The following is a list of what you can check: It may be a relay, located under control panel or the motor with a bad centrifugal switch, (bad motor) the idler spring switch / belt switch, or maybe a loose wire to the motor. Let me know if any of this helps.

The scoop is large. I call it the grave digger. Victor I want to thank you for your viewing, comments and 👍s There are many of us that grew & are still growing together. Stay well, Joe Z

Appreciate the vote of confidence. Have to say I was a little nervous sitting so high & running it on the hill.

Thank you for adding additional information. In this case the clutch did not click. Both the clutch & the switch were bad & replaced. Just for those who may be using a multimeter for the first time not all meters have the audio beep. Stay well, Joe Z

You're welcome brother, I am glad this was of help. And thank you for watching and taking the time to comment. @justinhebert8686 I have other videos on my channel that cover different subjects and new videos added weekly that may also be of help or interest. Your support is not required but always appreciated. If you are inclined to do so your Subscription, Likes, Comments and sharing this content would help me to reach other viewers that may also find this channel useful or entertaining. Stay safe, Joe Z

You're welcome, I am glad this was of help. And thank you for watching and taking the time to comment. Let me know if you have any questions. @user-cl8ln7mp2v I have other videos on my channel that cover different subjects and new videos added weekly that may also be of help or interest. Your support is not required but always appreciated. If you are inclined to do so your Subscription, Likes, Comments and sharing this content would help me to reach other viewers that may also find this channel useful or entertaining. Stay safe, Joe Z

@@JOEZEP54 thanks Joe. I do have one question. I purchased the ride on I mentioned above recently. It says Tecumseh on the hood and has a 13hp OV358EA Tecumseh engine. It has 13/86 on the rear fenders and a five speed Spicer rear end. It also has large "Colt Power" sticker on the sides of the hood. The hood and fenders/floor are red plastic. I can't seem to find anything online as to what drive belt I need. I am in New Zealand so it could be something sold here only. It has no headlight and is not a really large ride on. Do you recall ever dealing with one of these? It is from around 2006 and sometimes Castelgarten comes up in my searches. Thanks so much.

@@user-cl8ln7mp2vI would like to help you but I have not come across this mower. I looked up Castelgarten and at their website www.castelgarden.com/int/ you can look up a local dealer that should be able to get you the right belt. If not measure the belt & the size/angle of the V if possible. Let me know if this was of help.

@JOEZEP54 thanks. It is a Spanish made mower, sold in limited quantities through The Warehouse - New Zealand's version of Walmart. Since I asked you, I saw one for sale on trademe - our ebay. I looked at the photos they had posted and under the hood was an ID sticker mine didn't have. Through that, I contacted a company that was able to supply me with a drive belt. It also needs a new solenoid now but I ordered that last night. Thanks for your help though, funny how things come together.

@@user-cl8ln7mp2v You're welcome. Great detective work! Thank you for sharing.

I just checked the link out & found it working. Stay well, Joe Z

Check the cord. It may be out of the pulley causing it to bind. Let me know if this works out for you. Stay well, Joe A

Thank you. I give it my best. Stay well, Joe Z

Near the end of the video 7:08 to 7:11 I point to the the nut. Stay safe, Joe Z

You're welcome sir, I am glad this was of help. And thank you for watching and taking the time to comment. @soldieroftherisenking7907 I have other videos on my channel that cover different subjects and new videos added weekly that may also be of help or interest. Your support is not required but always appreciated. If you are inclined to do so your Subscription, Likes, Comments and sharing this content would help me to reach other viewers that may also find this channel useful or entertaining. Stay safe, Joe Z

@@JOEZEP54 Thank you sir!

@@soldieroftherisenking7907 You're welcome Sir. Stay well, Joe Z

Thank you for watching and taking the time to add this additional information. @dougcorwin3090 I have other videos on my channel that cover different subjects and new videos added weekly that may also be of help or interest. Your support is not required but always appreciated. If you are inclined to do so your Subscription, Likes, Comments and sharing this content would help me to reach other viewers that may also find this channel useful or entertaining. Stay safe, Joe Z

@jimiexplorationchannel2719, Thank you for stopping by. On the go kart in this video the clutch was rusty & very dirty. I do not work on go karts but was asked to get this one running. If yours is not moving check the clutch. It may be dirty, need oiling or just worn out. Be careful not to get any oil in the clutch drum or on the shoes. Let me know if this helped you out. Stay safe, Joe Z

I'm also having that problem

You're welcome! I was close to calling an electrician myself LOL I am glad this was of help. And thank you for watching and taking the time to comment. @salpaparo2466 I have other videos on my channel that cover different subjects and new videos added weekly that may also be of help or interest. Your support is not required but always appreciated. If you are inclined to do so your Subscription, Likes, Comments and sharing this content would help me to reach other viewers that may also find this channel useful or entertaining. Stay safe, Joe Z

You're welcome, I am glad this was of help. And thank you for watching and taking the time to comment on what you did & how it worked. @robertwilson5475 I have other videos on my channel that cover different subjects and new videos added weekly that may also be of help or interest. Your support is not required but always appreciated. If you are inclined to do so your Subscription, Likes, Comments and sharing this content would help me to reach other viewers that may also find this channel useful or entertaining. Stay safe, Joe Z

Hi @johnridings3291, you're welcome, I am glad this was of help. And thank you for watching and taking the time to comment. @johnridings3291 I have other videos on my channel that cover different subjects and new videos added weekly that may also be of help or interest. Your support is not required but always appreciated. If you are inclined to do so your Subscription, Likes, Comments and sharing this content would help me to reach other viewers that may also find this channel useful or entertaining. Stay safe, Joe Z

I was trying to place your accent. I’m guessing Boston or New York.

Accent??? LOL New York Stay well, Joe Z

LOL That is nothing compared to the time will spend taking care of them. On a positive note they are fun to watch and as time goes on you will learn ""better methods"" on taking care of them. If you can get a trailer to convert I find it the best way to go for a coop. Moveable if you change where you want to keep them and in most arears no permit needed. Check this video ruclips.net/video/baAkORto26s/видео.htmlsi=ceiWUXh7FB4fvp74 it is in Joe Zs Chickens playlist

Thank you for stopping by. Did this video help you out? Stay safe, Joe Z

@bobfellows6974 Good eye. You are correct. Bad editing on my part. I was turning back & forth to try to loosen it up. You can see I used the same procedure on frame 7:41. When I edited this video I did not notice I cut this part out. Thank you for watching & for your comment. Stay well, Joe Z

Hope it all went well. I still have my Blazer. As soon as I can get to it I will be doing some rust repair body work. Will be my first time with this type of repair. Stay safe, Joe Z

You're welcome. Glad this was of help. Thank you for support. Stay well, Joe Z

Thank you for stopping by. This is parts specific for axel assembly. Stay well, Joe Z

Thank you for stopping by & taking the time to add this comment. Stay safe, Joe Z

You're welcome, I am glad this was of help. And thank you for watching and taking the time to comment. @amerikayollar9592 I have other videos on my channel that cover different subjects and new videos added weekly that may also be of help or interest. Your support is not required but always appreciated. If you are inclined to do so your Subscription, Likes, Comments and sharing this content would help me to reach other viewers that may also find this channel useful or entertaining. Stay safe, Joe Z

I am glad this was of help. And thank you for watching and taking the time to comment. @BeannerDeBlieux-qe8si I have other videos on my channel that cover different subjects and new videos added weekly that may also be of help or interest. Your support is not required but always appreciated. If you are inclined to do so your Subscription, Likes, Comments and sharing this content would help me to reach other viewers that may also find this channel useful or entertaining. Stay safe, Joe Z

You're very welcome, I am glad this was of help. And thank you for watching and taking the time to comment. @vicosee4439 I have other videos on my channel that cover different subjects and new videos added weekly that may also be of help or interest. Your support is not required but always appreciated. If you are inclined to do so your Subscription, Likes, Comments and sharing this content would help me to reach other viewers that may also find this channel useful or entertaining. Stay safe, Joe Z

I agree and thank you for watching and adding this tip . @AlCatrraz I have other videos on my channel that cover different subjects and new videos added weekly that may also be of help or interest. Your support is not required but always appreciated. If you are inclined to do so your Subscription, Likes, Comments and sharing this content would help me to reach other viewers that may also find this channel useful or entertaining. Stay safe, Joe Z

You're welcome, I am glad this was of help. And thank you for watching and taking the time to comment. @JR-ht9pb I have other videos on my channel that cover different subjects and new videos added weekly that may also be of help or interest. Your support is not required but always appreciated. If you are inclined to do so your Subscription, Likes, Comments and sharing this content would help me to reach other viewers that may also find this channel useful or entertaining. Stay safe, Joe Z

Thank you for stopping by & your question. I would try removing the kill wire that is connected to the coil. If it then starts it may be a short in the wire or a safety switch. If you do this be very careful because you cannot shut the engine off with the key. Can either choke it all the way or have an insulated plier to remove the spark plug. Let me know how the repair goes. Stay safe, Joe Z

@@JOEZEP54 Thanks! I will give this a shot this weekend and report back.

You're welcome, I am glad this was of help. And thank you for watching and taking the time to comment. @ellenanna55 I have other videos on my channel that cover different subjects and new videos added weekly that may also be of help or interest. Your support is not required but always appreciated. If you are inclined to do so your Subscription, Likes, Comments and sharing this content would help me to reach other viewers that may also find this channel useful or entertaining. Stay safe, Joe Z

I was looking for the manual to be sure but could not find it. I filled it between the upper mark and the lower mark and did not have any issue. I believe the lower mark may be a minimum & the upper a maximum fill. I hope this is of help and thank you for watching and taking the time to comment. @oldguywisdom2904 I have other videos on my channel that cover different subjects and new videos added weekly that may also be of help or interest. Your support is not required but always appreciated. If you are inclined to do so your Subscription, Likes, Comments and sharing this content would help me to reach other viewers that may also find this channel useful or entertaining. Stay safe, Joe Z

???

@@JOEZEP54 yes you sound verry drunk

You're welcome, glad you enjoyed it. Thank you for visiting. If all goes well today I am going to get a little practice on it. If so it will be my next video.

Thank you for watching and taking the time to comment. @jlor7675 I have other videos on my channel that cover different subjects and new videos added weekly that may also be of help or interest. Your support is not required but always appreciated. If you are inclined to do so your Subscription, Likes, Comments and sharing this content would help me to reach other viewers that may also find this channel useful or entertaining. Stay safe, Joe Z

My pleasure and thank you for your support. Stay well, Joe Z